January 14, 2021
First, I think the top cowl is in a good place. The sides are now built up and there are no longer gaps on the sides. However, now material needs to be built up on the bottom cowl so the thickness matches the top cowl. Mañana Also, got the Elevtor tips filled in and floxed. Sanded that and coated with…
January 13, 2021
So the cowling fit is shit. To get it to line up in the back, the front is off – not terrible but off. The sides are the issue. On the pilot side there is a 7/16″ gap. WTF. So today the sides got built up to fill the gap. More fun tomorrow. The cabin top is now drilled and…
January 12, 2021
It started with the cowling. This things is way off, ugh. Even the top (without sanding the air inlets) will need a good 1/2 to 3/4 inch of fairing to make the cowling line up with the spinner. And the sides seams, yep that is going to be a ton of work too. Moving on… With a call to Stein…
January 11, 2021
Oh my, oh my. The bottom cowling was not fabricated ideally from Van’s… Took a lot of cutting, grinding, filling, and sanding to get the cowling to line up pretty well. The sides, bottom, and front all look great. The issue was getting the curves on the bottom to match the fuselage. They are close but there will be some…