February 1, 2021
So yesterday I spent over an hour trying to figure out why the brakes were dragging. Today I was committed to solving this drama. I took the brakes apart again. This time I found that the bolt holding the brake assembly to the axle had an interference issue. Why was this not in the manuals??? Still the rear pad was…
January 22, 2021
Another day of checking off boxes. I got the tail strobe wired up and threw down a thick layer of micro on the VS tip fairing. While that cured, the final skin got riveted. Wow, that felt great – even if it was quite loud bucking the rivets. The fuel servo was next up and thankfully the throttle and mixture…
October 17, 2020
After playing hokey for five days to go mountain biking in Moab it was back to work. Cleaned up the tailcone light mounting before continuing the riveting the the Elevator trim tab bracket and the Elevator ribs.
October 11, 2020
So I didn’t expect this step to take so long. Total of 8.25 hours for the three light, well technically five light boards. The tail frustrated me, there is an aluminum “C” bracket to attach the light. The problem was it was too big to fit the Van’s supplied tail cone. I sanded fiberglass, ground aluminum and after 90 minutes…