January 27, 2021
The ignition cables are now better organized with spacers between to ensure no cross firing. Got the screws installed in the tail fairing, which turned into more work than I expected. Well there were two nutplates involved… Before the window installed I needed to get the sunvisors mounted. With the doors on I could find the best location and then…
December 28, 2020
Back from winter break. Crazy but the build was at a standstill while I was gone. Huh. Guess I better get cracking. Started the day riveting the second rear seat back and then made the hinge pins. I set them aside until after I’m able to test the avionics, just in case there is an issue and I need to…
December 20, 2020
I started the day finishing up the wiring – well there is still wiring to do once the wings are on and the control sticks are in. Oh and once the carbon fiber panel comes back from the painter (respraying due to poor adhesion) I can connect the wires to the switches. But other than that is is done. Whew…
December 11, 2020
More jumping around today, the seat back brackets are cut and deburred. Next week when my daughter visits we should be able to get the rear seats finished up giving her something she can point to and say “I did that!” Most of the day was on wiring. I got to ELT mounted and tied up all the tail cone…
December 10, 2020
Took some time but I got all the nut plates for the instruments installed and the instruments mounted. Also got the defrost fans installed, wired up, and tested. Then it was on to the baggage and rear seat pans. All the parts are now dimpled and deburred. Still nervous about a missed wire so I’ll hold off on riveting them…